eos_ospf_interfaces

# Using merged

# Before state:
# -------------
# veos(config)#show running-config | section interface | ospf
# veos(config)#

- name: Merge provided configuration with device configuration
  arista.eos.eos_ospf_interfaces:
    config:
      - name: "Vlan1"
        address_family:
          - afi: "ipv4"
            area:
              area_id: "0.0.0.50"
            cost: 500
            mtu_ignore: true
          - afi: "ipv6"
            dead_interval: 44
            ip_params:
              - afi: "ipv6"
                mtu_ignore: true
                network: "point-to-point"
    state: merged

# Task output:
# ------------
# before: []
#
# commands:
# - interface Vlan1
# - ip ospf area 0.0.0.50
# - ip ospf cost 500
# - ip ospf mtu-ignore
# - ospfv3 dead-interval 44
# - ospfv3 ipv6 mtu-ignore
# - ospfv3 ipv6 network point-to-point
#
# after:
#   - address_family:
#     - afi: ipv4
#       area:
#         area_id: 0.0.0.50
#       cost: 500
#       mtu_ignore: true
#     - afi: ipv6
#       dead_interval: 44
#       ip_params:
#       - afi: ipv6
#         mtu_ignore: true
#         network: point-to-point
#     name: Vlan1

# After state:
# ------------
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
#    ip ospf cost 500
#    ip ospf mtu-ignore
#    ip ospf area 0.0.0.50
#    ospfv3 dead-interval 44
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore

# Using replaced

# Before state:
# -------------
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
#    ip ospf cost 500
#    ip ospf dead-interval 29
#    ip ospf hello-interval 66
#    ip ospf mtu-ignore
#    ip ospf area 0.0.0.50
#    ospfv3 cost 106
#    ospfv3 hello-interval 77
#    ospfv3 dead-interval 44
#    ospfv3 transmit-delay 100
#    ospfv3 ipv4 priority 45
#    ospfv3 ipv4 area 0.0.0.5
#    ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 retransmit-interval 115
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6

- name: Replace device configuration with provided configuration
  arista.eos.eos_ospf_interfaces:
    config:
      - name: "Vlan1"
        address_family:
          - afi: "ipv6"
            cost: 44
            bfd: true
            ip_params:
              - afi: "ipv6"
                mtu_ignore: true
                network: "point-to-point"
                dead_interval: 56
    state: replaced

# Task output:
# ------------
# before:
#   - address_family:
#     - afi: ipv4
#       area:
#         area_id: 0.0.0.50
#       cost: 500
#       dead_interval: 29
#       hello_interval: 66
#       mtu_ignore: true
#     - afi: ipv6
#       cost: 106
#       dead_interval: 44
#       hello_interval: 77
#       ip_params:
#       - afi: ipv4
#         area:
#           area_id: 0.0.0.5
#         priority: 45
#       - afi: ipv6
#         mtu_ignore: true
#         network: point-to-point
#         passive_interface: true
#         retransmit_interval: 115
#       transmit_delay: 100
#     name: Vlan1
#   - address_family:
#     - afi: ipv6
#       ip_params:
#       - afi: ipv4
#         area:
#           area_id: 0.0.0.6
#         hello_interval: 45
#         retransmit_interval: 100
#     name: Vlan2
#
# commands:
# - interface Vlan1
# - no ip ospf cost 500
# - no ip ospf dead-interval 29
# - no ip ospf hello-interval 66
# - no ip ospf mtu-ignore
# - no ip ospf area 0.0.0.50
# - ospfv3 cost 44
# - ospfv3 bfd
# - ospfv3 authentication ipsec spi 30 md5 passphrase 7 7hl8FV3lZ6H1mAKpjL47hQ==
# - no ospfv3 ipv4 priority 45
# - no ospfv3 ipv4 area 0.0.0.5
# - ospfv3 ipv6 dead-interval 56
# - no ospfv3 ipv6 passive-interface
# - no ospfv3 ipv6 retransmit-interval 115
# - no ospfv3 hello-interval 77
# - no ospfv3 dead-interval 44
# - no ospfv3 transmit-delay 100
#
# after:
#   - address_family:
#     - afi: ipv6
#       bfd: true
#       cost: 44
#       ip_params:
#       - afi: ipv6
#         mtu_ignore: true
#         network: point-to-point
#     name: Vlan1
#   - address_family:
#     - afi: ipv6
#       ip_params:
#       - afi: ipv4
#         area:
#           area_id: 0.0.0.6
#         hello_interval: 45
#         retransmit_interval: 100
#     name: Vlan2

# After state:
# ------------
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
#    ospfv3 bfd
#    ospfv3 cost 44
#    no ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6

# Using overidden

# Before state:
# -------------
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
#    ip ospf dead-interval 29
#    ip ospf hello-interval 66
#    ip ospf mtu-ignore
#    ospfv3 bfd
#    ospfv3 cost 106
#    ospfv3 hello-interval 77
#    ospfv3 transmit-delay 100
#    ospfv3 ipv4 priority 45
#    ospfv3 ipv4 area 0.0.0.5
#    ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 dead-interval 56
#    ospfv3 ipv6 retransmit-interval 115
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6

- name: Override device configuration with provided configuration
  arista.eos.eos_ospf_interfaces:
    config:
      - name: "Vlan1"
        address_family:
          - afi: "ipv6"
            cost: 44
            bfd: true
            ip_params:
              - afi: "ipv6"
                mtu_ignore: true
                network: "point-to-point"
                dead_interval: 56
    state: overridden

# Task output:
# ------------
# before:
#   - address_family:
#     - afi: ipv4
#       dead_interval: 29
#       hello_interval: 66
#       mtu_ignore: true
#     - afi: ipv6
#       bfd: true
#       cost: 106
#       hello_interval: 77
#       ip_params:
#       - afi: ipv4
#         area:
#           area_id: 0.0.0.5
#         priority: 45
#       - afi: ipv6
#         dead_interval: 56
#         mtu_ignore: true
#         network: point-to-point
#         passive_interface: true
#         retransmit_interval: 115
#       transmit_delay: 100
#     name: Vlan1
#   - address_family:
#     - afi: ipv6
#       ip_params:
#       - afi: ipv4
#         area:
#           area_id: 0.0.0.6
#         hello_interval: 45
#         retransmit_interval: 100
#     name: Vlan2
#
# commands:
# - interface Vlan2
# - no ospfv3 ipv4 hello-interval 45
# - no ospfv3 ipv4 retransmit-interval 100
# - no ospfv3 ipv4 area 0.0.0.6
# - interface Vlan1
# - no ip ospf dead-interval 29
# - no ip ospf hello-interval 66
# - no ip ospf mtu-ignore
# - ospfv3 cost 44
# - ospfv3 authentication ipsec spi 30 md5 passphrase 7 7hl8FV3lZ6H1mAKpjL47hQ==
# - no ospfv3 ipv4 priority 45
# - no ospfv3 ipv4 area 0.0.0.5
# - no ospfv3 ipv6 passive-interface
# - no ospfv3 ipv6 retransmit-interval 115
# - no ospfv3 hello-interval 77
# - no ospfv3 transmit-delay 100
#
# after:
#   - address_family:
#     - afi: ipv6
#       bfd: true
#       cost: 44
#       ip_params:
#       - afi: ipv6
#         dead_interval: 56
#         mtu_ignore: true
#         network: point-to-point
#     name: Vlan1

# After state:
# ------------
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
#    ospfv3 bfd
#    ospfv3 cost 44
#    no ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 dead-interval 56
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore

# Using deleted

# Before state:
# -------------
# veos(config)#show running-config | section interface | ospf
# interface Vlan1
#    ip ospf dead-interval 29
#    ip ospf hello-interval 66
#    ip ospf mtu-ignore
#    ospfv3 bfd
#    ospfv3 cost 106
#    ospfv3 hello-interval 77
#    ospfv3 transmit-delay 100
#    ospfv3 ipv4 priority 45
#    ospfv3 ipv4 area 0.0.0.5
#    ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 dead-interval 56
#    ospfv3 ipv6 retransmit-interval 115
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6

- name: Delete provided ospf interface config
  arista.eos.eos_ospf_interfaces:
    config:
      - name: "Vlan1"
    state: deleted

# Task output:
# ------------
# before:
#   - address_family:
#     - afi: ipv4
#       dead_interval: 29
#       hello_interval: 66
#       mtu_ignore: true
#     - afi: ipv6
#       bfd: true
#       cost: 106
#       hello_interval: 77
#       ip_params:
#       - afi: ipv4
#         area:
#           area_id: 0.0.0.5
#         priority: 45
#       - afi: ipv6
#         dead_interval: 56
#         mtu_ignore: true
#         network: point-to-point
#         passive_interface: true
#         retransmit_interval: 115
#       transmit_delay: 100
#     name: Vlan1
#   - address_family:
#     - afi: ipv6
#       ip_params:
#       - afi: ipv4
#         area:
#           area_id: 0.0.0.6
#         hello_interval: 45
#         retransmit_interval: 100
#     name: Vlan2

# commands:
# - interface Vlan1
# - no ip ospf dead-interval 29
# - no ip ospf hello-interval 66
# - no ip ospf mtu-ignore
# - no ospfv3 bfd
# - no ospfv3 cost 106
# - no ospfv3 hello-interval 77
# - no ospfv3 transmit-delay 100
# - no ospfv3 ipv4 priority 45
# - no ospfv3 ipv4 area 0.0.0.5
# - no ospfv3 ipv6 passive-interface
# - no ospfv3 ipv6 dead-interval 56
# - no ospfv3 ipv6 retransmit-interval 115
# - no ospfv3 ipv6 network point-to-point
# - no ospfv3 ipv6 mtu-ignore
#
# after:
#   - address_family:
#     - afi: ipv6
#       ip_params:
#       - afi: ipv4
#         area:
#           area_id: 0.0.0.6
#         hello_interval: 45
#         retransmit_interval: 100
#     name: Vlan2

# After state:
# ------------
# veos#show running-config | section interface | ospf
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6

# Using parsed

# parsed.cfg
# ----------
# interface Vlan1
#    ip ospf dead-interval 29
#    ip ospf hello-interval 66
#    ip ospf mtu-ignore
#    ip ospf cost 500
#    ospfv3 bfd
#    ospfv3 cost 106
#    ospfv3 hello-interval 77
#    ospfv3 transmit-delay 100
#    ospfv3 ipv4 priority 45
#    ospfv3 ipv4 area 0.0.0.5
#    ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 dead-interval 56
#    ospfv3 ipv6 retransmit-interval 115
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6
#

- name: parse provided config into structured facts
  arista.eos.eos_ospf_interfaces:
    running_config: "{{ lookup('file', './parsed.cfg') }}"
    state: parsed

# Task output:
# ------------
# parsed:
#   - address_family:
#     - afi: ipv4
#       cost: 500
#       dead_interval: 29
#       hello_interval: 66
#       mtu_ignore: true
#     - afi: ipv6
#       bfd: true
#       cost: 106
#       hello_interval: 77
#       ip_params:
#       - afi: ipv4
#         area:
#           area_id: 0.0.0.5
#         priority: 45
#       - afi: ipv6
#         dead_interval: 56
#         mtu_ignore: true
#         network: point-to-point
#         passive_interface: true
#         retransmit_interval: 115
#       transmit_delay: 100
#     name: Vlan1
#   - address_family:
#     - afi: ipv6
#       ip_params:
#       - afi: ipv4
#         area:
#           area_id: 0.0.0.6
#         hello_interval: 45
#         retransmit_interval: 100
#     name: Vlan2

# Using gathered:

# Device config:
# veos#show running-config | section interface | ospf
# interface Vlan1
#    ip ospf cost 500
#    ip ospf dead-interval 29
#    ip ospf hello-interval 66
#    ip ospf mtu-ignore
#    ip ospf area 0.0.0.50
#    ospfv3 cost 106
#    ospfv3 hello-interval 77
#    ospfv3 transmit-delay 100
#    ospfv3 ipv4 priority 45
#    ospfv3 ipv4 area 0.0.0.5
#    ospfv3 ipv6 passive-interface
#    ospfv3 ipv6 dead-interval 56
#    ospfv3 ipv6 retransmit-interval 115
#    ospfv3 ipv6 network point-to-point
#    ospfv3 ipv6 mtu-ignore
# !
# interface Vlan2
#    ospfv3 ipv4 hello-interval 45
#    ospfv3 ipv4 retransmit-interval 100
#    ospfv3 ipv4 area 0.0.0.6

- name: gather runnig config
  arista.eos.eos_ospf_interfaces:
    state: gathered

# Task output:
# ------------
# gathered:
#   - address_family:
#     - afi: ipv4
#       area:
#         area_id: 0.0.0.50
#       cost: 500
#       dead_interval: 29
#       hello_interval: 66
#       mtu_ignore: true
#     - afi: ipv6
#       cost: 106
#       hello_interval: 77
#       ip_params:
#       - afi: ipv4
#         area:
#           area_id: 0.0.0.5
#         priority: 45
#       - afi: ipv6
#         dead_interval: 56
#         mtu_ignore: true
#         network: point-to-point
#         passive_interface: true
#         retransmit_interval: 115
#       transmit_delay: 100
#     name: Vlan1
#   - address_family:
#     - afi: ipv6
#       ip_params:
#       - afi: ipv4
#         area:
#           area_id: 0.0.0.6
#         hello_interval: 45
#         retransmit_interval: 100
#     name: Vlan2

# Using rendered

- name: Render provided configuration
  arista.eos.eos_ospf_interfaces:
    config:
      - name: "Vlan1"
        address_family:
          - afi: "ipv4"
            dead_interval: 29
            mtu_ignore: true
            hello_interval: 66
          - afi: "ipv6"
            hello_interval: 77
            cost: 106
            transmit_delay: 100
            ip_params:
              - afi: "ipv6"
                retransmit_interval: 115
                dead_interval: 56
                passive_interface: true
              - afi: "ipv4"
                area:
                  area_id: "0.0.0.5"
                priority: 45
      - name: "Vlan2"
        address_family:
          - afi: "ipv6"
            ip_params:
              - afi: "ipv4"
                area:
                  area_id: "0.0.0.6"
                hello_interval: 45
                retransmit_interval: 100
          - afi: "ipv4"
            message_digest_key:
              key_id: 200
              encryption: 7
              key: "hkdfhtu=="

    state: rendered

# Task output:
# ------------
# rendered:
# - interface Vlan1
# - ip ospf dead-interval 29
# - ip ospf mtu-ignore
# - ip ospf hello-interval 66
# - ospfv3 hello-interval 77
# - ospfv3 cost 106
# - ospfv3 transmit-delay 100
# - ospfv3 ipv4 area 0.0.0.5
# - ospfv3 ipv4 priority 45
# - ospfv3 ipv6 retransmit-interval 115
# - ospfv3 ipv6 dead-interval 56
# - ospfv3 ipv6 passive-interface
# - interface Vlan2
# - ip ospf message-digest-key 200 md5 7 hkdfhtu==
# - ospfv3 ipv4 area 0.0.0.6
# - ospfv3 ipv4 hello-interval 45
# - ospfv3 ipv4 retransmit-interval 100