eos_l2_interfaces

# Using merged

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Merge provided configuration with device configuration.
  arista.eos.eos_l2_interfaces:
    config:
      - name: Ethernet1
        mode: trunk
        trunk:
          native_vlan: 10
      - name: Ethernet2
        mode: access
        access:
          vlan: 30
    state: merged

# Task Output
# -----------
#
# before:
# - name: Ethernet1
# - name: Ethernet2
# - name: Management1
# commands:
# - interface Ethernet1
# - switchport mode trunk
# - switchport trunk native vlan 10
# - interface Ethernet2
# - switchport mode access
# - switchport access vlan 30
# after:
# - mode: trunk
#   name: Ethernet1
#   trunk:
#     native_vlan: 10
# - access:
#     vlan: 30
#   name: Ethernet2
# - name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 10
#    switchport mode trunk
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using replaced

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 10
#    switchport mode trunk
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Replace device configuration of specified L2 interfaces with provided configuration.
  arista.eos.eos_l2_interfaces:
    config:
      - name: Ethernet1
        mode: trunk
        trunk:
          native_vlan: 20
          trunk_allowed_vlans: 5-10, 15
    state: replaced

# Task Output
# -----------
#
# before:
# - mode: trunk
#   name: Ethernet1
#   trunk:
#     native_vlan: 10
# - access:
#     vlan: 30
#   name: Ethernet2
# - name: Management1
# commands:
# - interface Ethernet1
# - switchport trunk native vlan 20
# - switchport trunk allowed vlan 10,15,5,6,7,8,9
# after:
# - mode: trunk
#   name: Ethernet1
#   trunk:
#     native_vlan: 20
#     trunk_allowed_vlans:
#     - 5-10
#     - '15'
# - access:
#     vlan: 30
#   name: Ethernet2
# - name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 20
#    switchport trunk allowed vlan 5-10,15
#    switchport mode trunk
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using overridden

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 20
#    switchport trunk allowed vlan 5-10,15
#    switchport mode trunk
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Override device configuration of all L2 interfaces on device with provided
    configuration.
  arista.eos.eos_l2_interfaces:
    config:
      - name: Ethernet2
        mode: access
        access:
          vlan: 30
    state: overridden

# Task Output
# -----------
#
# before:
# - mode: trunk
#   name: Ethernet1
#   trunk:
#     native_vlan: 20
#     trunk_allowed_vlans:
#     - 5-10
#     - '15'
# - access:
#     vlan: 30
#   name: Ethernet2
# - name: Management1
# commands:
# - interface Ethernet1
# - no switchport mode
# - no switchport trunk allowed vlan
# - no switchport trunk native vlan
# - interface Ethernet2
# - switchport mode access
# after:
# - name: Ethernet1
# - access:
#     vlan: 30
#   name: Ethernet2
# - name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# Using deleted

# Before state:
# -------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
#    switchport access vlan 30
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

- name: Delete EOS L2 interfaces as in given arguments.
  arista.eos.eos_l2_interfaces:
    config:
      - name: Ethernet1
      - name: Ethernet2
    state: deleted

# Task Output
# -----------
#
# before:
# - name: Ethernet1
# - access:
#     vlan: 30
#   name: Ethernet2
# - name: Management1
# commands:
# - interface Ethernet2
# - no switchport access vlan
# after:
# - name: Ethernet1
# - name: Ethernet2
# - name: Management1

# After state:
# ------------
#
# test#show running-config | section interface
# interface Ethernet1
# !
# interface Ethernet2
#    description Configured by Ansible
#    shutdown
# !
# interface Management1
#    ip address dhcp
#    dhcp client accept default-route

# using rendered

- name: Use Rendered to convert the structured data to native config
  arista.eos.eos_l2_interfaces:
    config:
      - name: Ethernet1
        mode: trunk
        trunk:
          native_vlan: 10
      - name: Ethernet2
        mode: access
        access:
          vlan: 30
    state: rendered

# Module Execution Result:
# ------------------------
#
# rendered:
# - interface Ethernet1
# - switchport mode trunk
# - switchport trunk native vlan 10
# - interface Ethernet2
# - switchport mode access
# - switchport access vlan 30

# Using parsed

# File: parsed.cfg
# ----------------
#
# interface Ethernet1
#    switchport trunk native vlan 10
#    switchport mode trunk
# !
# interface Ethernet2
#    switchport access vlan 30
# !

- name: Parse the commands for provided configuration
  arista.eos.l2_interfaces:
    running_config: "{{ lookup('file', 'parsed.cfg') }}"
    state: parsed

# Module Execution Result:
# ------------------------
#
# parsed:
#  - name: Ethernet1
#    mode: trunk
#    trunk:
#      native_vlan: 10
#  - name: Ethernet2
#    mode: access
#    access:
#      vlan: 30

# Using gathered

# Before state:
# -------------
#
# veos#show running-config | section interface
# interface Ethernet1
#    switchport trunk native vlan 10
#    switchport mode trunk
# !
# interface Ethernet2
#    switchport access vlan 30
# !

- name: Gather interfaces facts from the device
  arista.eos.l2_interfaces:
    state: gathered

# Module Execution Result:
# ------------------------
#
# gathered:
# - name: Ethernet1
#   mode: trunk
#   trunk:
#     native_vlan: 10
# - name: Ethernet2
#   mode: access
#   access:
#     vlan: 30